GM Gen III LS1/LS6/LS2 Quick Cam Covers
A timing cover that is of a two piece design. By removing the
top cover allows your camshaft to be replaced with out the pulling
the crank pulley off the car. This is really helpful on the C5 Corvettes
because they have to drop the rack and pinion to pull the crank pulley
off the car. Made out of heavy duty aircraft aluminum, not a cut stamped
OEM piece. Very strong and has OEM fitment. Comes with OEM crank
seal.
QTP High Volume Oil Pump
Never
deal with Oiling issues again!
Since we designed this cover from scratch we where able to create high volume
oil pump. You could not accomplish this with the factory cover due to its size.
We enlarged the lower half of the cover to accommodate a larger oil pump. The
QTP oil pump provides more volume of oil at a higher pressure relief setting.
The pump is designed with a gerotor designed to displace more than 15% more oil
than the original GM design.
A 2mm thicker gear rotor compared to the factory rotor. The
relief spring installed in the pump is designed to increase the internal by-pass
pressure setting an additional 10 psi. An additional spring is supplied which
will reduce the internal by-pass pressure back to original settings. The pump
design has also been improved by reducing flow restriction.
In addition,
pump materials have been changed to improve performance and durability. These
changes improve the pump’s efficiency resulting in better performance especially
during priming and at low rpm. This is not a ported oem pump. Brand new cast
pump that will out performane any ported factory unit!.
Photos
Plenty of
room to slid the cam in and out of the car!
Start out with a bare block of aluminum
The beauty of CNC!
CNC process in action!
PRICING
Price
Buy
LS1 Quick
Cam Cover
$435.00
LS2 Quick Cam Cover
$460.00
High
Performance Oil Pump
$180.00
Oil pump will only work with our cover. Will not clear factory timing cover. Will not work with double roller timing chain. Modification is necessary on a C5 with a ATI Damper that has AC underdrive pulley. For any Tech questions fell free to call us at 201-444-0998
